Repair and Packing Products for Hydraulic and Traction Elevators

Repair-and-Packing-Products-for-Hydraulic-and-Traction-Elevators
Packing Replacement Kit

Texacone offers an array of equipment, as well as a cylinder head reference guide, for technicians.

Texacone is located in Mesquite, Texas, where its products are manufactured for international distribution. Texacone has been in business for more than 80 years and offers a comprehensive lineup of packing and seals for the elevator industry. During that time, it has also developed:

Sanding Sleeve for Damaged Pistons

This is a tool that refinishes hydraulic plungers that are scratched or rusted or have developed wavy finishes – factors that can result in a shorter seal life and excessive leaking. Texacone states the Sanding Sleeve “refinishes the plunger to a factory-like finish for optimal ride performance.” The sleeve bolts to existing head hardware and is clamped around the plunger. Once relined, it is reusable.

Packing Replacement Kit

A complete set of tools that assists field technicians to quickly replace and install seal components in hydraulic cylinders or traction machines, this tool set is designed to prevent damage to precision equipment and seal components. Detailed instructions are included.

Cylinder Head Reference Guide

The Technician’s Reference Guide – Head ID Handbook helps technicians identify hydraulic cylinder heads. It includes more than 160 illustrations and helpful hints about identifying obscure jacks.

Sure Fill Repair Kit for Heavily Scored Pistons

This kit has the tools to repair badly scored pistons, rough joints and deep scratches on all plunger sizes. An acetylene torch is recommended for its use.

Cylinder Aligning System

This system aligns cylinder casings up to 90 ft. long and detects doglegged cylinders. The tool mounts on the cylinder casing. www.texacone.com

Since 1953, Elevator World, Inc. has been the premier publisher for the global vertical transportation industry. It employs specialists in Mobile, Alabama, and has technical and news correspondents around the world.

Get more of Elevator World. Sign up for our free e-newsletter.

Please enter a valid email address.
Something went wrong. Please check your entries and try again.
Escalator-Comb-Plate-Impact-Fixture-Test-Kit

Escalator Comb Plate Impact Fixture Test Kit

Warfield-&-Sanford

Warfield & Sanford

System-Analysis-and-Architecture-Methodologies-to-Drive-Innovative-Electrical-Systems

System Analysis and Architecture Methodologies to Drive Innovative Electrical Systems

Luandas-Chicest

Luanda’s Chicest

Gotham Growing

Gotham Growing

IEE-Expo-2015-in-Dhaka

IEE Expo 2015 in Dhaka

ADIASYSTEM

ADIASYSTEM

Figure 4: Getting the weight for a car with a tie-down system featuring compensation ropes takes only two steps: place the Henning device above the car hitch and measure the car weight.  One must step off the top of the car prior to any load measurements so that his or her weight will not be a consideration in attaining car weight.

A “New” Way to Weigh